|
|
|
|
|
Dial Thickness Gauges are used for measuring the thickness of a very wide range of materials such as leather, paperboard, paper, felt, rubber, glass, sheet, metal, films, plywood and plastics. The shape of the feelers should be adapted to the material being measured.
We normally supply all our Dail Thickness Gauges with feelers to form c as standard, unless otherwise stated inthis catalogue. Gauges can be supplied with other forms of feelers (a,b,d, or e) at no extra cost. |
compatible accessories:
for Thickness
Dial Gauges
general accessories
available documents in this area:
Catalogue
pdf-file (~1,8 MB)
For the pdf-files you will need the
Acrobat Reader. |
|
|
|
|
Specifications of the Technical data for Metric Dial Thickness Gauge |
|
|
Type |
Reading |
Range |
Depth of Jaw |
Form of the feeler available |
|
K 15 |
0,1 mm |
10 mm |
15 mm |
6,35 mm Ø, flat, 10 mm
Ø, flat, convex or spherical |
K 15/2 |
0,1 mm |
20 mm |
15 mm |
|
K50 |
0,1 mm |
10 mm |
50 mm |
a, b, c, d or e |
K 50 with lifting device |
0,1 mm |
10 mm |
50 mm |
K 50/2 |
0,1 mm |
20 mm |
50 mm |
K 50/3 |
0,1 mm |
30 mm |
50 mm |
K 50/5 |
0,1 mm |
50 mm |
50 mm |
K 100 |
0,1 mm |
30 mm |
100 mm |
K 200 |
0,1 mm |
30 mm |
200 mm |
K 300 |
0,1 mm |
30 mm |
300 mm |
K 400 |
0,1 mm |
30 mm |
400 mm |
|
J 12 |
0,01 mm |
8 mm |
12 mm |
6,35 mm Ø, flat or spherical |
J 15 |
0,01 mm |
10 mm |
18 mm |
6,35 mm Ø, flat, 10 mm Ø, flat, convex or spherical |
J 45 |
0,01 mm |
10 mm |
45 mm |
J 50 |
0,01 mm |
10 mm |
50 mm |
a, b, c, d or e |
J 50 with lifting device |
0,01 mm |
10 mm |
50 mm |
J 50 R |
0,01 mm |
5 mm |
50 mm |
Rollers |
J 50 R without side discs |
0,01 mm |
5 mm |
50 mm |
Rollers without side discs |
J 50 W |
0,01 mm |
10 mm |
50 mm |
Pin with coller for pipe walls |
J 50/3 |
0,01 mm |
20 mm |
50 mm |
a, b, c, d or e |
J 50/3 WP |
0,01 mm |
20 mm |
50 mm |
For corrugated boards |
J 100 |
0,01 mm |
10 mm |
100 mm |
a, b, c, d or e |
J 200 |
0,01 mm |
10 mm |
200 mm |
J 200/30 |
0,01 mm |
30 mm |
200 mm |
|
F 1101/30 |
0,001 mm |
1 mm |
30 mm |
6,35 mm flat, convex or spherical |
|
|
Specifications of the Technical data for Inch Dial Thickness Gauge |
|
|
Type |
Reading |
Range |
Depth of Jaw |
Form of the feelers available |
|
KZ 15 |
.005" |
.400" |
.6" |
6,35 mm Ø, flat, 10 mm
Ø, flat, convex or spherical |
KZ 15/2 |
.005" |
.800" |
.6" |
KZ 50/2 |
.010" |
.800" |
2" |
a, b, c, d or e |
KZ 50/3 |
.010" |
1.200" |
2" |
KZ 100 |
.010" |
1.200" |
4" |
KZ 200 |
.010" |
1.200" |
8" |
KZ 300 |
.010" |
1.200" |
12" |
KZ 400 |
.010" |
1.200" |
16" |
|
JZ 12 |
.001" |
.300" |
.5" |
6,35 mm Ø, flat or spherical |
JZ 15 |
.001" |
.400" |
.7" |
6,35 mm Ø, flat, 10 mm
Ø, flat, convex or spherical |
JZ 45 |
.001" |
.400" |
1.8" |
JZ 50 |
.001" |
.400" |
2" |
a, b, c, d or e |
JZ 50 with lifting device |
.001" |
.400" |
2" |
JZ 50 R |
.001" |
.200" |
2" |
Rollers |
JZ 50 R without side discs |
.001" |
.200" |
2" |
Rollers without side discs |
JZ 100 |
.001" |
.400" |
4" |
a , b, c, d or e |
JZ 200 |
.001" |
.400" |
8" |
|
F1000/30 Z |
.0001" |
.040" |
1.2" |
6,35 mm Ø, flat |
|
Available Feelers |
|
|
|
|
Rubber, felt, soft materials |
|
|
|
|
|
feeler a |
feeler b |
|
|
Soft leather, cardboard, paper, foils |
Hard leather, plywood, fibrous plates |
Sheets, hard materials |
|
|
|
feeler c |
feeler d |
feeler e |
|
|